Sinbosen Polyurea paint K3 altavoz de matriz de línea de audio dual de 12 pulgadas y 2 vías
Orador pasivo

Sinbosen Polyurea paint K3 altavoz de matriz de línea de audio dual de 12 pulgadas y 2 vías

Artículo No.: K3
Model: K3
Usable bandwidth (-10 dB): 42 Hz – 20 kHz
Maximum SPL: 143 dB
LF: 2 × 12″ neodymium cone driver
HF: 1 × 4″ diaphragm compression driver, neodymium
Weight (net): 43 kg / 95 lb
Descripción
  
Type K3 2 way audio line array system
Usable bandwidth (-10 dB) 42 Hz – 20 kHz
Maximum SPL1 143 dB
Nominal directivity 
(-6 dB)
Horizontal: 70° / 110° symmetric or 90° asymmetric
vertical: depending on number of elements and array curvature
Transducers LF: 2 × 12″ neodymium cone driver
HF: 1 × 4″ diaphragm compression driver, neodymium
Acoustical load LF: bass-reflex, L-Vents
HF: DOSC waveguide, Panflex
Nominal impedance LF : 8 Ω
HF : 8 Ω
Connectors 2 × 4-point speakON
Rigging and handling Flush-fitting 4-point rigging system
2 handles
inter-enclosure angles: 0.25°, 1°, 2°, 3°, 4°, 5°, 7.5° or 10°
Cabinet First grade Russian birch plywood, high density polyethylene
Front steel grill with anti-corrosion coating
acoustically neutral 3D fabric
Finish Dark grey brown Pantone 426 C
Dimension 950 x 402 x 355/286 mm   37.4 x 15.8 x 13.9/11.2in
Weight (net) 43 kg / 95 lb

  

 Feature of K3:                                 

Sinbosen K3 Dual 12" Altavoces de matriz de línea de audio de 2 vías
Hecho de madera contrachapada de abedul ruso de primer grado.
La superficie está recubierta con pintura de poliurea, que es anticorrosiva, impermeable y resistente al desgaste.
Los componentes de rejilla y aparejo de acero también son de acero de alta calidad con revestimiento anticorrosión.
El frente está envuelto en tela 3D acústicamente neutral.
Dos woofers de neodimio de 8Ω 450W y 12 pulgadas incorporados y un tweeter de 4 pulgadas y 8Ω 140W
K3 agrega algunos diseños fáciles de usar como:
¡Los ángulos entre gabinetes se pueden ajustar y puede reemplazar los altavoces sin desmontarlos!



2 × 12’’ neodymium cone driver(Detail1) 2 × 12’’ neodymium cone driver
(Detail2)
One 4 inch midrange
 

Yellow fluorescent label.

Angle adjustment pin.

The label won't show if it hangs properly, on the contrary, if it's not hung properly, you will see a prominent yellow fluorescent label Insert the angle adjustment pin into the corresponding angle of 0.25°, 1°, 2°, 3°, 4°, 5°, 7.5° or 10°: the cabinet will automatically adjust!


 
 
 

 
         

Comentario

Suscríbete para actualizaciones de productos y promociones!