2 CH Amplifier
Amplificador de subwoofer de 2 canales de 4200 W clase D con soporte trasero
Artículo No.: D2-4200 V2.0
Feature: 1U/Digital Amp/2 Ohms Stable
Output Power:
8Ω Stereo Power (RMS): 4,200W X 2CH
4Ω Stereo Power (RMS): 7,800W X 2CH
2Ω Stereo Power (RMS): 8,500W X 2CH
Output Power:
8Ω Stereo Power (RMS): 4,200W X 2CH
4Ω Stereo Power (RMS): 7,800W X 2CH
2Ω Stereo Power (RMS): 8,500W X 2CH
Descripción
|
Difference Between V2.0 And V3.0
Unlike the D series V3.0 version, which uses high-quality capacitors, power tubes, and other imported components, the V2.0 D series utilizes Chinese domestic components. This version primarily focuses on cost-effectiveness to meet various customer needs, while still retaining the features of the High Quality Nichicon capacitors and 2 ohms stable operation.Exclusive to V2.0, silicon-carbide output devices deliver cool-running, high-efficiency power; a temperature display active by default for continuous status monitoring; and a rear-mounted bracket that creates a vibration-isolated, road-tough rack connection. |
| D2-4200 V2.0 FEATURE |
| ►High Quality Nichicon capacitors from Japan |
| ►Silicon-carbide transistors,Stable at 2 ohms long-term load |
| ►Active PFC,soft-switching for high adaptability |
| ►Wide voltage range of 90V-270V for harsh environments |
| ►Efficiency,energy conservation, environmental protection |
| ►Standby sleep mode,power-saving and durable |
| ►High Quality XLR*/Speakon connectors |
| ►Damp Factor >5000 @20-200Hz,Powerful and profound low frequency |
| ►Temperature display module, real-time monitoring |
| ►Rack-locking rear bracket—shock-absorbed and flight-ready. |
| ►D2-4200 is powerful for 18-inch/21-inch subwoofer! |
Temperature Display:
|
REAR BRACKET
When the amplifier is mounted from the front, the rear bracket connects to the back of the rack case, providing support for the weight of the amplifier's rear. By securing the rear of the amp, the bracket minimizes movement and stress on the internal electronics, which is critical during transport where vibrations are constant.  |
D-SERIES PARAMETERS
FRONT PANEL FEATURE
REAR PANEL FEATURE
Dimensions and Cooling system
| NOTE: The size is 437mm inside of the device(without the cover plate and front panel).The size is around 472mm of the complete device,but a little bit different size in the different front panel.Some series with different size that had not shown,please learn it in the parameter. Tunnel through cooling system Cold air comes in from the front panel of the equipment, forms a duct through the radiator to take the heat away and out from the rear panel of the equipment. |
 |
